Owner & Service Manual

The following repair and maintenance manual applies for Harley Davidson Motorcycle FLHR/C/S 2006 models. Herein you will find detail and brief explanation, description and illustration of Harley Davidson FLHR/C and S. This manual is divided into sections which cover discussion on General Information, Maintenance Schedule, Engine Oil/Filter System, Air Cleaner, Tires, Wheels Spokes, Primary Chain/Lubrication, Clutch Adjustment, Transmission Lubrication, Drive Belt, Throttle Cables, Fuel System, Brakes, Spark Plugs, Troubleshooting, etc.

Cruise Control System
The Cruise Control system provides automatic vehicle speed control. The electronics and stepper motor are contained in a control module mounted under the left side cover. The stepper motor actuates the cruise control cable through a gear train and ribbon reel. The cruise control module “reads” the vehicle speed sensor (VSS) output to establish the desired vehicle speed. The module then sends a signal to the stepper motor which drives the ribbon reel to take up the slack in the cruise cable. The Cruise Enabled/Engaged lamp in the tachometer face (speedometer on FLHRC models) turns from red to green to indicate that the cruising speed is locked in.

(more…)

The following service and maintenance manual applies for Honda CB400 and CB450 Twins Motorcycles series for 1978 – 1987 model year. This manual is organized into chapters. Chapter One, General Information, provides the general information of the motorcycle and discuss equipment and tools useful both for preventive maintenance and troubleshooting. Chapter Two, Troubleshooting, contains methods and suggestions for quick and accurate diagnosis and repair of problems, troubleshooting procedures discuss typical symptoms and logical methods to pinpoint the trouble. (more…)

The following maintenance manual applies for IBM ThinkPad 380Z (2635) computer series. In this manual you will find detail information about product overview, specification, features, Checkout Guide, Optional Device Checkout (Port Replicator Checkout and External Monitor Self-Test), Power Management Features (e.g. standby mode, suspend mode, hibernation mode, and port replicator power overload), Symptom-to-FRU Index, Running the Diagnostics, Related Service Procedures, and FRU Removals and Replacements. (more…)