Wednesday, 17. March 2010 by support download
To remove or install the 2003 Honda Accord Coupe Steering Wheel, do the following:
First of all, you have to prepare the following tools and parts: Phillips screwdriver, 10 mm Combination wrench, Flat-tip screwdriver, 14 mm T-handle wrench, Torque wrench, Steering wheel puller, T-30 Torx bit.
- Make sure you have the anti-theft code for the radio, then write down the frequencies for the preset buttons.
- Disconnect the negative cable from the battery, and wait for at least 3 minutes before you start to install the wood trim steering wheel.
- Pry up on the retaining tabs, and remove the access panel from the underside of the driver’s side airbag.
- Remove the horn ground terminals and the airbag connectors from the switch set plate. Unplug the horn ground terminals.
(more…)
Sponsored Links
Saturday, 13. March 2010 by support download
To remove/install the 2005 Honda Civic (2-door HX and 4-door DX) Air Conditioner System, do the following:
Disconnect the battery. Remove the negative cable from the battery.
- Remove the driver’s dashboard lower cover and the under-dash fuse/relay box. Remove and save this washer bolt. Turn the two lock
knobs, then remove the driver’s dashboard lower cover.
- Remove the passenger’s dashboard lower cover and the glove box. Unlatch and remove the glove box. Remove the two 5 mm washer bolts. Remove the cover by pulling down on its front edge to release the three clips, then pulling it toward you to release the two rear pins.
(more…)
Sponsored Links