Owner and Service Manual Review

To install the 2005 Honda Odyssey Engine Block Heater, you will need tools such as: Phillips screwdriver, Ratchet, 24 mm Socket, Torque wrench, Diagonal cutters, Honda All season Antifreeze/Coolant, 8 mm Allen socket, Marker, Tape measure.

To install the 2005 Honda Odyssey Engine Block Heater do the following instructions:

1. Allow the engine and all cooling system components to cool down.
2. Place a clean drain pan under the radiator drain plug, then remove the drain plug from the bottom of the radiator to drain the coolant. Remove the radiator cap to increase the flow.

(more…)

To remove or install the 2003 Honda Accord Coupe Steering Wheel, do the following:

1. First of all, you have to prepare the following tools and parts: Phillips screwdriver, 10 mm Combination wrench, Flat-tip screwdriver, 14 mm T-handle wrench, Torque wrench, Steering wheel puller, T-30 Torx bit.
2. Make sure you have the anti-theft code for the radio, then write down the frequencies for the preset buttons.
3. Disconnect the negative cable from the battery, and wait for at least 3 minutes before you start to install the wood trim steering wheel.
4. Pry up on the retaining tabs, and remove the access panel from the underside of the driver’s side airbag.
5. Remove the horn ground terminals and the airbag connectors from the switch set plate. Unplug the horn ground terminals.

(more…)